Grand PE-2500E Professional
 |
 |
Close
Grand PE-2500E Professional
Operating modes:hammer drilling, without a hit, chiselling
Power:2500 W
Number of strokes:4500 bpm
Idle speed:850 rpm
Cartridge type:SDS+
Power supply:mains (230 V)
Weight:5.2 kg
Network hammer of a “barrel” design (with a vertical engine). It can operate in drilling modes (chuck rotation speed up to 850 rpm), impact drilling and chiselling (impact frequency up to 4500 beats/min). The Grand PE-2500E Professional rotary hammer is equipped with a powerful 2500-watt motor, so it can be used to perform a wide range of installation and dismantling work, including drilling concrete and masonry (up to 30 mm), chipping and demolition of building structures. The tool is supplied with a plastic case, an additional handle, a drilling depth limiter, a boot and a set of accessories (drills, chisels and picks) that fit the SDS+ chuck installed on this hammer drill.
All specifications
Specifications PE-2500E Professional
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||
Information in model description is for reference purposes.
Before buying always check characteristics and configuration of product with online store manager
Catalog Grand 2024 - new products, best sales and most actual models Grand.
Before buying always check characteristics and configuration of product with online store manager
Catalog Grand 2024 - new products, best sales and most actual models Grand.
Series Grand Professional
drill driver, gun, brushless motor, 450/1700 rpm, cartridge: keyless, Ø 13 mm, reverse, motor brake, power supply: battery, 21 H, Li-Ion, 2, case
chain, rechargeable, battery 2, canvas 300 mm, chain pitch 3/8 ", keyless, weight 3.7 kg
angle grinder, rechargeable, without battery, saw blade 125 mm, 3000 – 8400 rpm, soft start, motor protection, safety clutch, additional handle
semi-automatic inverter, welding: MMA, MIG/MAG, welding current: from 30 A, up to 360 A, электрод до 5 mm, wire: from 0.6 mm, up to 1 mm, power supply: 230 V, from 160 V, display
stationary, planing: width 110 mm, depth 3.5 mm, 1700 W, double-sided knives, stationary, shoe, dual dust out system
drill driver, gun, brushless motor, 550/1400 rpm, cartridge: keyless, Ø 13 mm, impact mode, reverse, power supply: battery, 20 H, Li-Ion, 2, case
chain, rechargeable, battery 2, canvas 200 mm, chain pitch 1/4 ", motor protection, keyless, LED light
angle grinder, rechargeable, saw blade 125 mm, 8500 rpm, soft start, motor protection, additional handle, case
inverter, welding: MMA, welding current: from 30 A, up to 350 A, электрод до 5 mm, power supply: 230 V, from 160 V, display, снижение напряжения VRD
hammer drilling, 3900 bpm, without a hit, 800 rpm, chiselling, 2400 W, 6 J, weight 5.4 kg
drill driver, gun, brushless motor, 450/1750 rpm, cartridge: keyless, Ø 10 mm, impact mode, reverse, motor brake, power supply: battery, 21 H, Li-Ion, 2, case
chain, rechargeable, battery 2, canvas 400 mm, chain pitch 3/8 ", soft start, keyless, weight 4.9 kg
angle grinder, 1550 W, saw blade 125 mm, 11000 rpm, soft start, speed controller, additional handle
inverter, welding: MMA, welding current: from 30 A, up to 330 A, электрод до 5 mm, power supply: 230 V, from 160 V, display, снижение напряжения VRD
drill driver, gun, 400/1300 rpm, cartridge: for bit and quick clamp, Ø 10 mm, reverse, motor brake, power supply: battery, 12 H, Li-Ion, 2, case
polishing, 1850 W, saw blade 180 mm, 600 – 3000 rpm, speed controller, additional handle
We recommendCompare using chart →
hammer drilling, 5400 bpm, without a hit, 1230 rpm, chiselling, 800 W, 2.3 J, weight 2.4 kg
hammer drilling, 5800 bpm, without a hit, 1050 rpm, chiselling, 1100 W, 2.8 J, weight 3.3 kg
hammer drilling, 5500 bpm, without a hit, 1500 rpm, chiselling, 800 W, 2.6 J, weight 2.6 kg
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, quick cartridge change, weight 2.9 kg
hammer drilling, 4800 bpm, without a hit, 1250 rpm, chiselling, 2 J, brushless motor, power battery, 20 V, 4 Ah, LED light
hammer drilling, 4000 bpm, without a hit, 900 rpm, chiselling, 800 W, 2.7 J, weight 2.7 kg
hammer drilling, 4400 bpm, without a hit, 1150 rpm, chiselling, 880 W, 3.2 J, quick cartridge change, weight 3.1 kg
hammer drilling, 5100 bpm, without a hit, 1300 rpm, chiselling, 1000 W, 3.2 J, quick cartridge change
hammer drilling, 5350 bpm, without a hit, 1450 rpm, chiselling, 900 W, 3 J, quick cartridge change, LED light, weight 3.1 kg
